震前卫星热红外环形应力场特征   总被引：6，自引：1，他引：5  

强祖基  姚清林  魏乐军  赵勇  郭坚峰  曾佐勋  谢红接 《地球学报》2008,29(4):486-494

本文包括两部分内容:①描述了1996年2月3日云南丽江Ms7.0级地震,震前几天的卫星热红外图像呈现圆形,它的NNW、NW、SN、及NE向的热旋扭面往S收敛。该地震地表破裂由一系列张扭性裂缝组成,呈左旋左列,水平位错不明显,垂直断距数厘米。垂直力对构造变动的作用较为明显;而丽江地震震源机制解破裂面II的走向NNE6o,倾向W,倾角44o,P轴方位为NNE3o、仰角75o,近于直立,综合热旋扭面展布、地震地表破裂特征及震源机制解,得出该旋扭椭圆为地幔外侧右旋上涌所造成;②菲律宾萨马岛Ms7.0～7.5强震群及青海共和Ms7.0地震前热应力环椭圆的推进路径。根据这一特征得出交变潮汐力的地球动力学解释。卫星热红外图像震前应力热场的方法是临震预测地震的有效方法,卫星热红外技术辅以震源机制解和地表破裂带力学分析是研究地球动力学有力工具。地球自转速度变化,交变潮汐力和地幔旋扭上涌力是地球动力学的主因。  相似文献   

西藏札达盆地控盆断裂有限元数值模拟   总被引：1，自引：0，他引：1  

段岩  孟宪刚  邵兆刚  朱大岗 《地质通报》2008,27(10)

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。  相似文献   

应用探地雷达探测活动断层   总被引：1，自引：0，他引：1  

薛建  贾建秀  黄航  易兵  张良怀  张羽 《吉林大学学报(地球科学版)》2008,38(2):347-350

在浅覆盖区采用探地雷达探测地震活动断层。通过实验确定出最佳的采集参数和数据处理流程,在雷达剖面上,能够清晰地显示出断层上部的形态特征、上断点埋深和岩土分层。结合钻孔资料,利用雷达剖面上对第四系覆盖的分层结果和上断点所在的层位可以分析和评价断层的活动性。  相似文献   

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献     

孙升林 《中国煤炭地质》2008,(6):1-5

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!  相似文献   

Stability Analysis and Numerical Simulation of Differential Frost Heave     

Rorik A. Peterson 《Mathematical Geosciences》2008,40(3):277-298

Differential frost heave is often implicated in the formation of patterned ground in regions subject to recurrent freezing and thawing. A linear stability analysis (LSA) indicates that a continuum model of frost heave is linearly unstable under typical natural freezing conditions of silty-clay soils. A two-dimensional non-linear numerical analysis corroborates the frozen time LSA results, and also indicates the importance of non-linear and time-dependent terms that ultimately lead to a preferred mode, which the LSA fails to predict. Instability of the one-dimensional solution occurs at shallow freezing depths and near-zero surface loads when positive perturbations in the ice content at the freezing front lead to a concomitant increase in thermomolecular pressure and upward ice velocity. Differential frost heave can then occur because of the increased heat flux from the perturbed surfaces. A three-dimensional model using random initial surface perturbations indicates that regular surface patterns will evolve with a length scale in the order of 2–4 meters, which corresponds quite closely with naturally-occurring non-sorted patterned ground.  相似文献   

Hybrid seismic modeling based on discrete-wave number and finite-difference methods     

Jiří Zahradník  Peter Moczo 《Pure and Applied Geophysics》1996,148(1-2):21-38

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.  相似文献   

Accelerating ground warming in the Canadian Prairie provinces: Is it a result of global warming?     

Jacek A. Majorowicz 《Pure and Applied Geophysics》1996,147(1):1-24

The results of precision temperature logs made to depths of several hundred meters in some 80 wells in Western Canada, most of which are located in the Prairie Provinces, show evidence of warming at the ground surface in the 0.5 K to 3.5 K range (average=2.2±0.7 K, for 80 unevenly distributed sites). Modeling shows that this warming mostly pertains to this century and it has been most substantal in the last four decades if the ramp function of the linear increase of surface temperature is assumed. Using the step function model's increase of surface temperature (land clearing, forest fires, etc.) the calculated onset of warming would pertain mostly to the last two decades. Contour maps of ground temperatures currently and previously and a contour map of the ground warming magnitude dilineate a large regional character of the ground temperature change at the southern marigin of permafrost for the large area of the Prairie Provinces. In many cases however, the magnitude of ground warming is much larger than the magnitude of air warming. This is especially evident for the northern areas of Alberta in the boreal forest ecoprovince. The magnitude of ground warming is equal to the magnitude of surface air warming in southern Alberta in the grassland and aspen parkland ecoprovinces. The analysis of the temperature depth response to the surface warming from well data shows the integrated effect of surface air warming together with the increases in ground temperature due to natural terrain effects and other anthropogenical changes to the surface of the earth.  相似文献   

Blind prediction of the site effects at Ashigara Valley,Japan, and its comparison with reality     

J. Zahradník  P. Moczo  F. Hron 《Natural Hazards》1994,10(1-2):149-170

Weak and strong ground motions were numerically predicted for three stations of the Ashigara Valley test site. The prediction was based on the records from a rock-outcrop station, one weak-motion record from a surface-sediments station, and the standard geotechnical model. The data were provided by the Japanese Working Group on the Effects of Surface Geology as a part of an international experiment. The finite-difference method for SH waves in a 2-D linear viscoelastic medium (a causalQ model) was employed.Comparison with the real records shows that at two stations the predictions fit better than at the third one. Strangely, the two better predictions were for stations situated at larger distances from the reference rock station (one station was on the surface, the other in a borehole). The strong ground motion (the peak acceleration of about 200 cm s^–2) was not predicted qualitatively worse than the weak motion (8 cm s^–2). A less sophisticated second prediction (not submitted during the experiment), in which we did not attempt to fit the available weak-motion record at the sedimentary station, agrees with the reality significantly better.  相似文献   

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy     

P. D. Cole  J. E. Guest  A. M. Duncan 《Bulletin of Volcanology》1993,55(7):467-480

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.  相似文献   

施工顺序对软土地坪复合地基的影响探讨     

魏海涛  蔡智 《岩土工程技术》2021,(1)

场地回填土与搅拌桩施工顺序将直接影响软土地坪复合地基的处理效果,其中沉降控制是影响地坪安全运行的关键。以近海软土地区工业厂房水泥土搅拌桩复合地基工程为例,探讨了复合地基水泥土搅拌桩、回填土两种不同施工顺序的影响因素及相应处理效果;通过数值模拟试验,计算分析了不同填土厚度下两种工况的地基固结总沉降、施工沉降、工后沉降。结果表明,采用“先土后桩”的施工顺序的施工期沉降大于“先桩后土”,但工后沉降大大减小,提高了软土地坪地基处理效果,有利于处理后地坪的安全运行,验证了前述分析结论,为合理设计方案的确定提供了重要的参考依据。  相似文献